The Furled Leader

 How many of you guys have fly fishing accessories that lie useless for years in a drawer, box, or bag? While rambling through one of my many drawers of fly fishing stuff the other day I discovered this furled leader that I found. After researching my blog I discover I did a post concerning this leader fishing the Sipsey in 2016 but never used it that day. I thought as I examined the package that it would be a good replacement for my 4 weight mono leader I had been using for years. Once I buy a leader the first thing I do is replace the tippet end of the leader with a tippet ring. By doing that I can tie on tippet after tippet of 3 ft. or longer for a number of seasons. I applied the same procedure to this new furled leader.

A few false cast in the back yard convinced me that it was worth giving a try on the trip I had planned on Smith last Thursday. I was using the leader with my 4 weight 9 ft. Redington. My first cast using this leader showed me the difference in the mono leader I had been using for years versus the furled leader. I was impressed with the ease of casting especially in the wind that was occurring at times that morning. The info on the package indicated it was made with Uni-thread as opposed to the mono strands used to construct mono furled leaders. The mono furled leaders are much stiffer and retain memory. The Uni-thread gives the leader the ability to have no memory. In other words, no bend in your leader line. It cast accurate and landed lightly on the water. I also noticed that on my line pick-up from the water surface there is no spray water. My favorite characteristic of this leader is the no memory factor which reduces drag when fishing dries or nymphs. It floats quite well on the surface without sinking and affecting the action of the fly or popper. I read where one can add some floatant if they prefer. I'm still using it without floatant.  

After doing a little research on the leader I found they are made in 4, 5, 6, or 7 ft. lengths. The one I am using is a 6 ft. length with the tippet ring attached. This leader will last me the rest of the season and even into next season. I found no fly shops carrying these leaders because they are constructed most of the time by individuals and are not factory-made. I'm so impressed I'm already in the process of searching Ebay for more Uni-thread leaders. In fact, I will be using all furled leaders for the next season.  

They're still on the walls!!!

 

A Capital “P” for Persistence Thursday on the Sipsey

As I drove the 145 miles Thursday to fish the Sipsey, I was thinking how easy it once was to drive the 12 miles from our house in Jasper. The trip now is a bit more important than it was back then.

Partly cloudy skies keep the sun from penetrating the crystal clear waters of the area I was going to fish this day. The water level was somewhat low which makes the Sipsey more difficult to fish, and as always the pressure from other fly fishermen adds to the challenge.

This section is where my wading boots got the most use, fishing small pocket holes throughout the stretch. No surface activity at all caused me to stay down under with nymphs changing back and forth from tight lining to the indicator. I was using a furl leader today casting upstream and letting the nymphs drift slowly back to me. I choose to do this because of the super clear low water levels I encountered. The trout spook easily in these conditions and they had been hammered all morning by other fishermen.

I landed my first rainbow of the afternoon using a long 6X fluorocarbon tippet tipped with a size 20 tungsten bead-head midge.  My eyes had to strain a bit even with my magnifying glasses to thread the line through the eyelet of the fly. I seldom fish a fly this small but it was producing and I couldn’t complain.

The 4 weight today enabled me to get a little more backbone in the hook set, which I needed fishing those tiny nymphs. I wondered if this trout had spent a lot of time in the deep holes of the Sipsey causing it to have a very little color, but still beautiful. Persistence kept me focused this day through long periods of no takes. A couple more rainbows would touch the net this afternoon before I headed back home. 

I noticed this turkey hen in our backyard the other morning and ran and got my camera and took the shot through the window. I knew if I stepped outside on our porch it would spook. Not the best picture, which continues to make me search for a better quality camera. I hope you guys have a great week!

Testing The Furled Leader

Today I was back on the Sipsey to continue evaluating the furled leader. It passed the test last week as I used it high sticking pocket water. The main characteristic of the leader that really got my attention was its low memory. Once you remove it from the package and give it a slight stretch it is ready to fish without any coiling as opposed to a mono leader. I also noticed that I could control the placement of the tippet much better with this leader mainly because of the added weight of the strands that make up the leader. Also, the grey color of the leader helps me know exactly where my tippet was during the drift through the pocket water; superb leader for high sticking.

For today’s trip, I wanted to see how it would react when nymphing and dries were added to the mix. I arrived late today and had a couple of hours to give it a try. With no hatch occurring I decided to wade into position and let a nymph drift through a small run I hadn’t fished since last year. I was using a size 14 beadhead nymph and begin working it through the run. What I notice almost immediately was how much slower the drift was with this leader. The light 6X tippet stayed in front of the leader throughout the drift. Very little mending was needed because I was just letting the leader/tippet drift with the current. As I made cast after cast I would set the leader/tippet in position at the top of the run and the rest of the way it was on its own drift. I did notice at times the leader would overtake the tippet and fly in the fast sections of the run, but after a quick mend, it would correct itself and continue the drift.

Today was one of those outings that caused me to try numerous nymph patterns until I finally connected with a bow. This was my nymph trout for the day that help prove that this unconventional drift method really worked. Two other trout were missed that helped boost my confidence level.

I moved to another area of the tailrace to cast the leader using a dry fly. There was a small midge hatch occurring in a shaded deep run close to the opposite bank. The trout were surface feeding, but not what I would call aggressively. The midges were tiny so I tied on a size 20 Renegade. The white hackle on the Renegade helped me see the tiny fly much better. I was downstream from the hatch activity and casting upstream into the feeding zone. In other words, I wanted to see how the leader performed on a downstream drift coming back to me. As I made numerous cast upstream, I kept noticing how light the tiny little fly would touch the water. As the fly touched the water I would watch as the dry would float back above the leader/tippet without any mending, this I liked. The takes were always close to the spot where the trout were feeding. Using a 4 ½ ft. tippet enable me to get the fly in the feeding area without the furled leader being noticed; I was spot casting. I discovered this technique while watching videos from Jonathan Barnes, who uses the furled leader for all his fly fishing techniques. This downstream drift was my favorite technique I tried today and is one I will continue to use on future trips.



This rainbow along with others landed and lost was brought to the net using the downstream technique. I let this rainbow have the Renegade, which was deep in its throat. I hope it will survive to fight another day.   

High Sticking in Pocket Water

I wanted to try my new furled leader out today, so no generating and off I went to the Sipsey. I forgot it was a holiday weekend, so that explained all the vehicles in the parking area and on the side of the road for a weekday. This didn’t discourage me, because I knew exactly what I was going to do; use the high sticking method on some of the pocket water I normally fish with a mono leader mending technique. 

The video below shows some of the trout I landed using the High Sticking technique in this one particular hole which is about 5 ft. deep. A couple of boulders on both sides of the hole caused fast current in the seam and at the end of the hole, a swirl of back current creates the pocket. By starting the nymph drifting at the mouth of the hole, through the middle and into the back swirl; I got the maximum attention of the trout, which were settled in a depth of 4 to 4 ½ ft. I was using a 6 ft. furl leader with 5 ft. of 6X tippet, the tippet was the part of the leader that got the work. The water was super clear, so the lighter tippet made for more action.

P.S. I am using a new program call Handbrake to increase the volume on my videos now, it works great and I hope this is an improvement from my volume in the filleting video.

I'll use today’s trip as another learning experience in my quest to become a better trout fisherman!!