Christmas Come Early

I just received my Fly Fishing Lanyard from Nature Boy. It is made from 550 USA paracord. You can specify your core lump color and then select an outer color, in other words it is constructed to your specifications. Keith who owns Nature Boy makes all the merchandise on the site. As an added bonus, he threw in a Hat Patch with a couple of flies attached to the patch. I am really impressed with the quality of both of these products, and best of all they are made in the USA. I can’t wait to use both items soon on the tailrace.

Guys I have gone from a vest to a chest pack, and even lighter to a lanyard

Fishing Kevin's Soft Hackle Fly

It is hard to believe that this past Wednesday in Jasper was a warm 72 degrees. This meant only one thing for Charles and me, which was wetting a fly on the upper section of the tailrace. Upon arrival we noticed a number of vehicles and one Alabama Power truck, so we knew we would have company. The guys with Alabama Power told us that the generators would not be running for the day; because of work they would be doing on the last installment of the metal steps they were completing.  With no worries of generators we headed to the first hole of the day.  

Charles waded across and fished an area down from a section I chose to fish above in some faster water. I had landed trout here before, but the task at hand was getting to the place. No one fishes this area, because one has to wade some distance over some very slippery moss covered rocks to get into position to even make the first cast. Once there you need to establish a good foot position, on the bottom of the stream to keep your balance in the fast current. I never wade now without a wading staff and it is an absolute must in places like this. The trout are always here because of the deep fast run that extends at least 75 feet. It’s difficult to fish here with an indicator, because of the rapid water causing the indicator to float up and under fast. I have always fished this run either swinging a nymph or dead drifting a nymph. I was using the soft hackle that Kevin at Feather Chucker tied for me a while back. He mailed some other patterns that I will give a try later on in the spring. The soft hackle beadhead really got my attention, so it got the first try in this fast water.  After a number of misses I got my first solid hit. I knew this was a good trout and not your average stocker, because I could feel the head shake and for a few seconds I thought I had the trout coming my way, but that wasn’t going to happen on this day. As I was trying to maneuver the trout out of the run it promptly snapped the 5x tippet and carried the soft hackle with it. Sorry to say this was the only soft hackle Kevin gave me in this pattern style. I tied on another nymph pattern and continued to cast through the run without another hit. As I left the run I knew I would be back here again to try to redeem myself, hopefully with another soft hackle Kevin might tie for me in the near future.

Landing this trout made me feel somewhat better after losing what I think was probably my best on the upper tailrace. I landed 3 other rainbow in this same area. Two went airborne trying to throw the tiny shrimp pattern, which just adds to the excitement of landing one of these rainbows.

I seldom ever use anything but a 3 weight when fishing this section of the tailrace. I think using anything heavier would be overkill. The majority of trout landed here are all stocker fish, with the exception of a larger trout such as the one I lost today. The stocker trout in the 10” to 12” range can be a blast on a 3 wt.

 

 



Coping With the Odds on Those Slow Fishing Days

The weather at the tailrace today was cloudy skies and a light breeze. Rain was in the forecast for the following day, so that told me that the trout should be active. Dries were the choice for the morning and after lunch we went with nymphs. Neither proved to be successful this day, but it was good to be on the water with my fishing buddy Charles. We both agreed that our next trip would be below the pump station which is where the bigger trout hang out. Streamers and buggers will be the choice of flies for that outing.

 

Lunch today was pack of peanut butter crackers or “nabs” which is what we use to call these little crackers in Mississippi when I was a kid.

 

Charles managed a nice rainbow from this area; sorry I didn’t get the image I was knee deep fishing a run on the other end of this stretch.

I landed this bow later in the day on an Adams fishing in some of the slower water. The fast current water wasn’t working today with the nymphs and the dead drifting techniques. This trip is what inspired me to write the post about mono and fluorocarbon leaders this past week.

 

On a slow day like this one I really try to analyze why the trout are not taking my offering. Was it the fly selection, presentation, not mending the line properly, locating water holding trout, leader/tippet selection, lack of hatch, or could it have been the trout were just not feeding during that time of day????  Who knows it could have been all the above or it could be that one little thing I haven’t discovered yet. I can say it was not because of persistence and patience on our part, because we gave what we thought was our best on this day.  



 

 

 

 

 

Monofilament Leader Verses Fluorocarbon Leader---Opinion???

As I was fishing the tailrace the other day I kept noticing how my leader was reacting on the water surface. I realize that if one doesn’t get the line to lay straight on the surface after a cast, then you will encounter a coiled leader and tippet. If I can see the coil tippet then the fish can see the tippet. If you hit that sweet spot in your cast most of the time then there is no coil in the leader or more important in the tippet. It was a slow day on Thursday with Charles and me fishing the tailrace, and on those slow days I tend to notice little things that I wouldn't notice on a more active day. Thursday was one of those days, and that little thing I kept noticing was my tippet coil. Yes the cast plays a part in the coil, but not having your leader and tippet stretched before you ever start fishing also plays a big part in the leader/tippet coil. The more I cast the more I notice something else that many of us I am sure have seen; and that is being able to see your tippet on the water surface in gin clear water. The tailrace is always gin clear and most of the time I can see my leader and tippet line, which is mono. I don’t use the most expensive tippet line, which is fluorocarbon as opposed to your standard mono line. I do feel the fluorocarbon is less visible in the water, but according to research the mono floats somewhat better. Research also tells me that fluorocarbon tends to coil less coming off the spool, which of course would help with fewer coils on the water surface. So with these factors in mind I decided to do a little more research into the mono verses fluorocarbon leader/tippet concept. I thought the following read I found on the internet recently explains most of the issues I was trying to find answers for on Thursday; but I am also interesting in your opinion on mono verses fluorocarbon, and why would you choose either leader?  

 

Differences between Fluorocarbon and Monofilament.

• Material-fluorocarbon in made from a sophisticated polymer.  Mono is essentially plastic.
• Fluorocarbon is “More Clear” in clear water (refractive index is nearly identical to water.)
• Fluorocarbon is more abrasion resistant than monofilament in the same size.
• Fluorocarbon stretches less (almost none.)
• UV(sunlight) damages monofilament over time, but not fluorocarbon.
• Monofilament floats, fluorocarbon sinks
• Surprisingly, 10lb mono and 10lb fluoro are about the same diameter.



Orvis 'Super Strong' Leaders are monofilament.  Orvis 'Mirage' Leaders are flourocarbon.

Dry Fly Fishing: When water conditions are not gin clear, monofilament floats nicely.  And while mono is slightly heavier than water, surface tension holds the mono on the surface.  This will help keep dry flies on the surface.  When fishing a clear lake on a dead calm day, fluorocarbon may be better, because it is more invisible, but you will have to grease you fly to keep it floating.  But most dry fly fishing is on a lake that is tannic, or on a river that has a ripple surface.    Either disguises mono.  So, most of the time, use monofilament when fly fishing with dry flies.
Wet Fly or Nymph Fishing:  Fluorocarbon sinks.  This is a perfect match for fishing subsurface flies.  Even lightly weighted flies sink easily in a pond with fluorocarbon.  On the river, again the fluorocarbon sinks and gets flies down.  Don’t be mistaken, weighted flies are needed and sometimes split shot is still needed.  For anglers who refuse to use indicators, a mono leader with a fluorocarbon tippet creates a nice combination.  Make sure to seat the knot carefully when typing fluorocarbon to monofilament.
Top water popper fishing:  Mono, unless the water is gin clear, then use fluorocarbon.  If fishing a popper/dropper, use fluorocarbon on the dropper tippet.

Fluorocarbon tippets tied to a monofilament leader:  Originally not a good combination, but better now.  The flexibility/stiffness of the two materials may be different, so the tippet might be too stiff or limp for the leader that it was tied. Carefully flex your leader and see if transitions are smooth arcs, or lumpy.  This is easier than it sounds, and surprisingly critical to turning over a fly.  Ideally, use the same brand and type of tippet material and leader.  I prefer a 100% fluorocarbon leader (when using fluorocarbon.)  Also, the fluorocarbon has a shell-like exterior, so knots that are mediocre will hold in a mono to mono connection, but will not hold in a flouro to mono connection.  Make sure the knots seat perfectly, lubricate with moisture, and tighten slowly.  Newer flouro is easier to knot than the original fluorocarbons.
Recently, the makers of most fluorocarbon leaders removed expiration dates.  Simply, it has been found that UV does not degrade the material and the shelf life is perhaps five years or more.  It is also much more abrasion resistant, and the leader just last longer.  This is the economy fluorocarbon.  It is a great tool for the angler when applied properly.

 

 

 

 

 

Battling Heavy Wind Trout Fishing

I knew today’s forecast was calling for wind slightly out of the north, but what I encounter on the tailrace today was boat sailing wind. I almost left when I saw how windy it was through the gorge leading up to the dam. I remembered making these windy trips here before. I did have the water pretty much to myself, because there was only one other vehicle in the parking lot when I arrived, so with that encouragement I stayed. Dries were out not only because of the wind, but leaves as well, so I tied on size 12 bead head Prince Nymph dead drifting some of the usual places I always fish at the mouth of the tailrace. I lost two trout within the first 10 minutes here, mainly due to show reaction by me. The short takes convinced me to change flies and go with a smaller nymph, and move on to another area above me. I have found that when the fish are finicky the smaller the pattern the better results.





This rainbow fell prey to a weighted size 16 bead head grey scud dead drifting the fly through some fast water, that I have learned to fish to my advantage. This would be the only trout taken for the morning on the nymph, numerous hits, but no results

I really like this fast water dead drifting a bead head pattern. I never see anyone fishing this area, which is too my advantage. I lost 3 trout in here before I finally connected with the scud trout. I think I would have been a bit more successful if not for the tremendous wind I had to contend with here practically on every cast.

As I left the fast water I notice that there was some fairly calm water ahead of me on the west side of the tailrace which was sheltered by trees that lined the bank. The closer I got to the calm water the better it looked because I was noticing some surface action. This told me that there might be a possibility of landing a trout or two on top.  So I tied on the Bomber which is my go to dry fly when surface activity is present.

I was rewarded with this rainbow using Allen’s Bomber, Small Stream Reflections, on a long drift. I had to make some long cast to reach the surface trout on the other side of the tailrace; which would consist of numerous fail cast because of sudden wind burst whipping down the gorge.

I will admit that today was quite a challenge considering the weather. I forgot to mention the temperature was in the low forties today with a cold front approaching bringing temperatures in the low twenties for the coming weekend.

As I was leaving and walking back to the my truck I notice that most of the color from the leaves have gone for this year.

They will eventually cover the road by December---and we will be back to fall again sooner than we all think

 

 

 

 

 

 

 

November Fly Swap

I thought I would share my latest fly swap with you guys from Nick at Brookfield Angler. I received these three nicely tied Sculpins flies in the mail yesterday for my swap. The spots on Smith Lake and the big rainbow on the tailrace should really attack this pattern. Nick did a nice job tying the Sculpin.

 

 

My post last month titled Become a Blogger Fly Swap Fiend explains my reasoning behind swapping flies. These are the flies I have up for swap this month.

 







Upper left is a size 18 Dry Coachman--right top is size 14 Mayfly---Middle is a size 20 Beadhead Brown Midge--Lower left is a size 14 Brown Drake--Lower right is a size 20 Grey Scud

 

Unconventional Fly Fishing Techniques

While at this years Trout Festival I had the opportunity to visit with Bob Shanks who is the author of Around the Next Bend. Bob is a working encyclopedia when it comes to fly fishing. What intrigues me about this guy is his simplicity to the sport. He fishes with fly rods and reels that are priced far below the top of the line equipment. A lot of his accessories such as line, nets, waders, and smaller items are all bought at bargain prices. The title of this post Unconventional Fly Fishing Techniques certainly applies to Bob. He shared a few of those techniques with all of us last Saturday.

1.     He never uses a knot or loop to connect his leader to his fly line.  Bob’s technique is dipping ¾” of his fly line into fingernail polish remover to remove the coating on the fly line to make it more flexible---next you would insert a tiny pin and onto a larger pin into the end of the fly line to open it wide enough to insert your leader butt end which is cut at an angle into the ¾” fly line end with the leader end being coated with super glue. Squeeze the fly/leader lines together for at least 30 seconds and you have a knotless fly line leader connection that will stand the test of a 5 lb. brown. I actually tried to pull the prototype apart Bob provided for all of us at the Festival and no one broke it apart. Your line travels through your guides much faster when using this type connection. I will be trying this technique.

2.     Clean your fly line with any detergent and warm water at least every other fishing trip. This will enable the line to flow through the guides much easier. It will also make for a smoother line pick-up from the water surface. Cleaner fly will increase the life of the line.

3.     Wear hip waders, not only for the added comfort in the summer months, but hip waders are cheaper than chest waders. One seldom wears in water waist deep.

4.     Seldom make 30 ft. cast, to a target, instead merely wade the extra 10 ft. to place your fly at 20 ft. instead. You are much more accurate at 20 ft. as oppose to 30 ft.

His presentation ended with a handout asking one question; which trout species would you rather pursue a brown or rainbow and tell why? There were some interesting answers given and discussed. I will end this post by asking the same question---Which trout species would you rather pursue a brown or rainbow and tell why?  

Another Successful Trout Fest in the Books

A beautiful cool fall Saturday welcomed in this years Trout Fest which was held at the RiversideFly Shop, located on the banks of the Sipsey River. The event was sponsored by the Sipsey Trout Unlimited Chapter 639. This years Festival was loaded with activities, such as dry fly casting, door prizes, raffles, guest speakers, casting tutorials, children’s activities, casting competition, exhibits, fly tying, and striper-on-fly-forum. It was a fun event for the young and old, male and female and most of all a way to meet and greet avid fly fishermen and women. The event was to raise money for the big trout project that the Sipsey Trout Unlimited Chapter 639 has sponsored for the past couple of years. Last year’s goal was to raise 1500.00 which was met and this year’s goal reached that number and more. It is so rewarding to see so many fly fisherman turn out to support this cause.

I have to commend the guys in charge of smoking the pork and spare rids for lunch, it had to be some of the best pull pork I have tasted in a long time. Everyone else present agreed the meal was outstanding. The big smoker was smoking long before the crowd showed up.

Everyone attending could sign up here for a 10.00 ticket that was good for lunch and a chance to win the 10 ft. Nucanoe Frontier Hybird Kayak, worth 1,049.00. Notice the round plastic containers on the table, the lids were labeled with the name of each item to be raffled off.  One could buy 5.00 tickets for a chance to win any of the raffled items which was given away after lunch.

A lot of 10.00 tickets were sold to win this item. The individual who won the Nucanoe told me that his present canoe was on its last run, so winning the Nucanoe was a welcome addition for him.

The Bristol Bay Retreat in King Salmon, Alaska was another fantastic prize for the right ticket holder. A 10.00 raffle ticket would get you a chance to win this trip for two valued at 6500.00. A lot of tickets were sold for this trip of a lifetime.  

This was another item that got a lot of attention and sold a lot of 10.00 tickets; the Kamado Joe Ceramic Grill and Smoker, valued at 849.99. Other items that were raffled off were: Measure nets with rubber bag in three different sizes, pair of Korkers guide boots, Echo Edge fly rod, dry, nymph, and streamer fly boxes, 2 spools of Air-Flo fly line, Guideline Sunglasses, Guided Drift Boat Trip down the Sipsey Fork, and a Wading Guide trip for two from Riverside Fly Shop.

A number of fly tiers were available tying patterns used on and beyond the Sipsey. Joe Tremblay from Huntsville Alabama demonstrated some really nice dry and nymph patterns. He is a member of the Tennessevalleyflyfisher.org organization. Another excellent fly tier was Ted Crona who was from Scottsboro, Alabama. He demonstrated some really nice streamer patterns. His email address is tedcrona@yahoo.com

An array of streamers, dries, and nymphs were on display.

Local fly tier Steve Fletcher owner of Fletcher’s Flies was on hand to tie some of the popular patterns used on the Sipsey. Visit his website to see a variety of flies he ties and fishes with.

There were a number of kids participating in the casting competition.

This lady told me that she and her husband both fly fish and have been on a number of guided float trips in Tennessee. She was competing in the distance cast. The winner of this competition hit 72 ft.

 
Lunch begin with a line waiting for some of the pull pork, cole slaw, pork and beans, bread, and choice of drink. As stated earlier, the food for this years Fest was awesome!!!

Lifetime fly angler and author Bob Shanks was on hand to share with everyone his unconventional fly fishing techniques part II. He was at the Trout Derby back in the spring to present techniques I. Bob has fished in Idaho, Colorado, and Montana for years casting for rainbow and brown trout. He has spent the last 20 years during the summer months in Montana fishing all of the well known streams and rivers. The information he shared with everyone was priceless.

Around the Next Bend is a collection of stories and techniques that Bob has written to help one become a better fly fisherman. The book sold out at Trout Fest Saturday. A lot of Bob’s 70 years of fly fishing has gone into this book. He will be 84 in a couple of months and still fishing astounding!!

 

Legionary fly rod/reel, magazine contributor and fly casting expert Ted Calvert gave a demonstration on “Striper-on-the-Fly.” The casting skills he demonstrated were amazing. He guides on Smith Lake chasing the big stripers using his 8/9 wt. fly rod. He fishes streamers in the 4 to 6” lengths, using the big heavy bass bug line. 30 lb. stripers are not unusual for him to land using the fly rod. 

A tremendous amount of work went into this year’s festival, which produced a great turnout from the locals and many from outside the county and state. The money raised will ensure the stocking of many 20” rainbow and above for the coming year. Congratulations are in order to The Sipsey Trout Unlimited Chapter 639 and Randy and Brandon owners of Riverside for another successful year with Trout Fest. Hope to see everyone back for next years event.

 

 

 

  
  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Moth or Muddler Either Pattern Will Produce Savage Hits

I came across one of my favorite early spring patterns this weekend, while selecting flies for my fly swap. It is the Muddler Minnow or what I like to call a glorified moth.  It seems each year I discover a new fly as most all of us do when fishing tends to get slow with your traditional fly patterns. I find the more I fly fish the more I like to experiment with other fly patterns. The pattern doesn’t have to match any hatch or be an insect the fish are hitting that particular time of day or year. It can simply be an attractor to get the attention of the fish. Like most flies the moth, which is what I will it, is that type of a pattern. It is that in your face fly that seems to drive fish nuts when nothing else will get a hit. I started fishing this pattern late last spring and into the July on Smith Lake and had tremendous success with it. My first intentions was to use it to land some monster bluegill in the gin clear water of Smith Lake, but I found out it was an awesome bass fly as well. The reactions from the spots in the lake were amazing. My next quest for this little jewel is the tailrace to see if I can get some rainbow interested. It would be an excellent fly to use in the fast ripples there. Floatant is a must when fishing this fly, because it possesses a big bushy body, which can soak up moisture fast in the form of getting water logged quickly. This fly is not hard to find it is in most fly shops and easily found on the net. The following image proves it worth!!

This beautiful spot inhaled the Moth on one of my early morning outings at Smith Lake early April this year. The action took place in the back of a nook area. I cast the fly right against the edge of some rocks, and  saw the wake before the fish ever took the fly, and knew I was in for a hit. This fish exploded on the fly and the fight was on. I landed it using my 9 ft. 5 wt.

Another spot which was taken by the Moth last year in the first part of July. 

These two bull bluegills were the victim of the Moth. I landed numbers of bluegills from Smith and the smaller lake Walker using the Moth. The 5 wt. was used to land both of these fish.

What I love about this fly is the light presentation one can achieve when casting on a smooth silk water surface. It doesn’t scare or spook the fish on days when the fish are on edge and not in the mood to hit anything. I actually purchased all the above Moths from our local Wal-mart, which has a small fly section set up in the sporting goods department. Today’s post will be the first in a series of reports I will be doing from time to time on flies I think will increase your fish catch ratio. I hope some of you guys will feature a fly you think is a winner in some of your future post as well.